High Lifter Signature Series 4″ Lift Kit for Polaris Ranger 900 XP

Posted on January 24, 2013

Ranger XP 900 with 4” Signature Series Lift Kit

Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s Ranger XP 900 4” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.
The High Lifter 4” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.
This kit contains alignment cones for 10mm bolts for use with factory tie rod/rod ends and OEM bolts If you have upgraded or plan to upgrade to our Pro Series Tie Rod/Rack End kit, see notes below.

Ranger XP 900 4” Signature Series Lift Kit

4” Lift Kit Features:

All hardware needed for successful installation
User-friendly instructions
Bolt-on application; takes approximately 1-2 hours for install
Zinc plated
Front and rear lift
Clear-coated High Lifter name plate

High Lifter’s Steering Stops (RANGER-SSK) are a must-have for Ranger Lift Kit owners. The Steering Stops helps reduce the turn radius and can help prevent breaking an axle.

Fits:
Polaris Ranger XP 900 (2013)

Notes:
1.5″ spacers are required in the rear if you are running factory 900 Ranger steel wheels.