Factory Accessories Available for the Can-Am Maverick

Posted on September 20, 2012

The most powerful side-by-side vehicle in the industry, the Can-Am Maverick is a force to be reckoned with, and we have the accessories to enhance your riding experience even more. Make the best side-by-side vehicle even better with these essential add-ons built rugged and designed for easy installation, and see the difference genuine Can-Am Off-road Accessories can make.

Can-Am Maverick 1000R Accessories

Baja Style Spare Tire Holder
Because you never know where you’ll be when misfortune strikes, the cool look- ing Baja Style Spare Tire Holder could save your day. Its design allows for fast installation and removal of the tire with specifically designed tie-down straps. It is also compatible with or without the Wheel Jack.

Baja Style Spare Tire Holder

Wheel Jack
Without a doubt a must-have accessory to change a flat out on the trail. Its large base offers more stability, even on soft ground, and it includes a 17 mm wrench to remove the wheel nuts.

Wheel Jack

Sport Aluminum Doors
These bolt-on doors are made of lightweight aluminum. Designed to open wide and rearward, and equipped with a slam latch and door catch, they allow the driver and passenger to get in and out easily. Their powder coated black paint adds a custom and bold look that will get you noticed.

Sport Aluminum Doors

Trailering and Storage Cover
Can-Am branded 300-denier solution-dyed cover.
Water repellent polyester construction. It fits with or without: roof, light rack, rear bumper, front bumper, side mirrors and spare tire holder. It has a trap for fuel and access to passenger area. You can attach it securely to your vehicle thanks to the heavy-duty cord around the bottom. It features soft material in the windshield area to prevent scratches while trailering.

Trailering and Storage Cover

Rear Bumper
Made of heavy-duty 1.5 inch(4cm) steel tube with 1/8” skid plate
Rear receiver hitch compatible

Rear Bumper

Receiver Hitch
Heavy duty 2” receiver hitch, 1,300 pounds of pulling capacity.

Receiver Hitch

Front Skid Plate
Draw-formed 5052-H32 aluminum plate
3/16 inch (4.5mm) thick for durability and strength
Engraved Can-Am logo

Front Lateral Skid Plate
Draw-formed 5052-H32 aluminum plate
3/16 inch (4.5mm) thick for durability and strength – Engraved Can-Am logo
Sold in pairs

Rock Slider Bar
Made of heavy-duty 1.5 inch(4cm) steel tube
Lightweight

Rear Skid Plate
5052-H32 aluminum plate
3/16 inch (4.5mm) thick for durability and strength
Engraved Can-Am logo

A-Arm Protectors
5052-H32 aluminum plate and plastic deflector
3/16 inch(4.5mm) thick for durability and strength
Engraved Can-Am logo
Sold in pairs

Trailing Arm Protectors
5052-H32 aluminum plate
3/16 inch (4.5mm) thick for durability and strength
Engraved Can-Am logo
Sold in pairs

Skid Plates and Arm Protectors

Cargo Bed Liner
Made of durable polyethylene plastic with drain holes, it covers the rear end of your Maverick for endless cargo possibilities. With 4 solid mounting locations to attach your items, you can now carry almost anything you want and need, like a cooler. No tools required to install or remove the Cargo Bed Liner. It can even be used with the Baja Style Spare Tire Holder.

Cargo Bed Liner

Can-Am Maverick 1000R Accessories – Windshield Lineup
Adding a windshield to your Can-Am Maverick will give you instant protection against wind and debris while riding. The Can-Am lineup offers three easy-to- install options to fit all riding styles and conditions.

Full Windshield

Full Windshield (Hardcoated)
It combines the utmost in protection from the elements with optical clarity while riding. The hardcoated polycarbonate material on both sides offers better impact and abrasion resistance, as well as prolonged protection against wear- and-tear for a longer “like-new” look than acrylic windshields. The windshield also features non-yellowing, non-crazing, non-cracking and UV-resistant properties. The quick-attach brackets procure fast, easy and tool-less installation and removal.

Full Windshield
Thanks to its durable polycarbonate construction, the Full Windshield is de- signed for optical clarity and better impact resistance than acrylic windshields. It also features non-yellowing, non-crazing, non-cracking and UV-resistant properties. The quick-attach brackets procure fast, easy and tool-less installation and removal.

Half Windshield
Designed for protection from wind and debris as well as optical clarity, the rugged, durable polycarbonate construction offers better impact resistance than acrylic windshields. It features a reverse angle lip to deflect air flow, and non- yellowing, non-crazing, non-cracking and UV-resistant properties. The quick-attach brackets procure fast, easy and tool-less installation and removal.

12V Power Outlet
Cargo box mounted 12V accessories outlet. Easy plug-in harness included. Practical for those electrical carry-ons.

12V Power Outlet

Bimini Roof With Sun Visor
Here’s a versatile accessory that lets you choose the level of protection you need to fit the moment. The soft top can be rolled up on the hard visor, allowing more air in and letting you enjoy the sun. The hard visor also gives you the possibility of installing the Can-Am light rack, for extra lighting and a custom look.