The standard Kawasaki Teryx only comes with three idiot
lights. A digital dash is
Original Equipment on Teryx™ 750 4x4 LE model. Fortunately, the
wire harness for both dashes is available on the standard Teryx as the LE, so you can upgrade to
LE digital dash.
The Kawasaki part number is
99994-0110 and it retails for $219.95.
The dash information includes:
-
Speedometer
-
Dual Trip Meter
-
Hour Meter
-
Clock
Here is what comes in the package.
Remove the hood. Phillips screws around the sides and
cab area, and also the brackets holding the headlights in place. This
will allow you to slide the hood up on the roll bar. From there I
propped it open with a long stick and some bungee cords. If you are
more adventurous, you can remove the roll cage and completely remove the
hood. Sure would have been nice to have a hood that opened....
Remove the old dash.
Attach new bracket to the new digital dash.
Find the new wire harness. On my Teryx, the wire
harness had a protective cover over it and was on the driver's side.
Install the dash using the new o-ring.
The install was pretty easy. It took about half and
hour and the only tools I needed was a Phillips screw driver and a 10mm
wrench.
Since this was really the only thing I wanted on the Teryx
LE, it was cheaper to buy the standard and upgrade the dash.
