****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube
Inc. - http://www.opencube.com)****
Sitemap
·
Home
·
Bulletin Board
·
UTV
Reviews
·
UTV Trip
Reports
·
Advertising
·
Links
·
Contact Us
·
About Us
| |
Polaris RZR
Product Review - Roll Cage
As seen in Side x Side
Action Magazine - April 2008
Information:
Stock Polaris RZR - Roll cage is a bit ugly and could use a bit more strength
(cross bracing & material thickness).
Hot Ride 4 U offers two
styles of roll cage for the Polaris RZR - Standard and Baja. The Standard is
more or less a replacement for the stock cage, and the Baja adds the two
bars that go backwards and end up in the bed.
Installation:
The installation of the roll
cage went well. The stock cage removed easily and the new cage lined up with
the stock mounting holes with just a little persuasion.
Review:
Besides being less than attractive, the
stock cage sure didn’t give me the warm and fuzzies that it would hold up
well in a serious roll over. I wanted to stay as light as possible, and
didn’t want to take up any of the limited bed space with bars that attach to
the bed or rear frame. The roll cage that caught my eye was made by Hot Ride
4 U. The cage is computer designed and tested before the first bend is made.
It has a good amount cross bracing for added strength without adding so much
that the additional weight will start affecting performance.
The fit and finish of the Hot Ride roll
cage is nice and I have received lots of positive compliments on the cage
since the install. A few things I would change if I were to do it again is
to add another whip flag mount on the passenger side, and I would change the
way the shoulder harnesses mount so they wrap around the tube behind the
seats instead of bolting to a tab.
Other Photos:
Standard cage
Baja cage
Contact Info:
Hot Ride 4 U
Website:
www.hotride4u.com
Location: Bakersfield, CA
Phone: (661) 587-7702
Email: sales@hotride4u.com
|
