Sitemap

· Home
· Bulletin Board
· UTV Reviews
· UTV Trip Reports
· Advertising
· Links
· Contact Us
· About Us

Product Review

Polaris RZR Airbox Cover

Information:

EHS Racing universal filter cover with double plate

Here is a picture of the stock RZR airbox chamber.  Although the hole is pretty large, the bed plastic covers all but a small gap at the bottom (see arrow).

Installation:

Disassemble EHS Racing cover so you can use the bottom plate as a template for where to cut/drill.

I cut the hole a bit too high.  The top two bolt holes ran into the air box.  Lowering it about 1/2" from what I did would be about right.

Install rubber gasket and first plate.

Install Outerwears and second plate.

Conclusion:

This is a great way to increase airflow to the engine without sending all kinds of dirt to your air filter. Finished installation takes advantage of the airbox opening. Installation takes about 1/2 hour and the finished product looks great.

Contact Info:

EHS Racing
1975 N US 1 
Rockingham, NC 28379

Website: www.ehsracing.com
Email: sales@ehsracing.com
Phone: 866-997-2345

Copyright © 2004-2008 Crowley Offroad LLC. All rights reserved. No images or content represented on this web site may be copied, stored, manipulated, published, sold or reproduced in whole or in part without express written permission.

OpenCube AJAX Components