Product Review
Loading Ramps from LongATVRamps.com
Information:
LongATVRamps.com
specialize in long, lightweight ramps which allow you to safely load your
ATV or UTV into a truck, flatbed or tall trailer. The ramps are made from
6061 aluminum weigh about 28 lbs each. The ramps are 9.5 ft. long and 15 in.
wide, but fold to just 64 inches.
The 9.5' ATV Ramps will support up to 1000 lbs per ramp or 2000 lbs per set.
The ramps are 15 in. wide with 3" angle
side walls keeps tires inside.
Kick Stop prevents ramps from
sliding forward.
The ramps fold in the middle with plenty of material to hold the weight of a
UTV and are setup to maintain an arc for added strength.
Conclusion:
If you like to haul your UTV in the back of a truck, then
you know how nerve racking it can be to load with short ramps that aren't
rated for the weight of a UTV.
LongATVRamps.com
has that all figured out with long ramps that fold in half for easy hauling,
but with the strength needed to safely load into the back of a truck. The
ramps are made very well and are priced so it is a no-brainer.
When loading your UTV, remember to drive up in 4WD/Low and
ALWAYS use a tie down ratchet or cam buckle strap to avoid ramp
kickout.
Other Photos:
Contact Info:
LongATVRamps.com
Website:
www.longatvramps.com
Phone: 888-284-1280
|
