Sitemap

· Home
· Bulletin Board
· UTV Reviews
· UTV Trip Reports
· Advertising
· Links
· Contact Us
· About Us

  Product Review

Quick Release
Fire Extinguisher Mount

Information:

The RPS Quick Release Fire Extinguisher mount is made from mild steel. The mounts are powder coated red or can be ordered raw.

The fire extinguisher is attached with hose clamps to the removable part of the mount and stays attached to the fire extinguisher.

The mount can be attached in one of three ways:

1. Hose Clamps
   
    

2. Bolt-On
   
    

3. Welded
   

Once installed, the fire extinguisher can be quickly removed by pulling the pin and rotating the fire extinguisher out and up.

   

Conclusion:

The RPS Quick Release Fire Extinguisher is very flexible.  The fire extinguisher is easily mounted using hose clamps on a roll bar, bolts on tabs or a flat plate or welded in place.  Once mounted, the fire extinguisher is held solidly in place until you are ready to use it.  Then it removes simply and quickly.

Other Photos:

Contact Info:

Motorsports²
Rancho Santa Margarita, CA

Phone: (949) 713-5193

Website: www.motorsportsquared.com

Copyright © 2004-2008 Crowley Offroad LLC. All rights reserved. No images or content represented on this web site may be copied, stored, manipulated, published, sold or reproduced in whole or in part without express written permission.

OpenCube AJAX Components