UTV Guide Forum Index
Advertisement

 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Polaris RZR Oil Change

 
Post new topic   Reply to topic    UTV Guide Forum Index -> Polaris RZR
View previous topic :: View next topic  
Author Message
utvguide
Site Admin


Joined: 05 Dec 2007
Posts: 586

PostPosted: Thu Feb 07, 2008 6:25 pm    Post subject: Polaris RZR Oil Change Reply with quote

Time for my RZR's first oil & filter change.


Oil Filter is Polaris #2540086

The RZR engine oil capacity is about 2 quarts (1.9L). Use Polaris oil - 0W-40 Synthetic (Part # 2871281). If you are going to use another type of oil, it must be 0W-40 synthetic with an API certified "SH".



The drain plug is under the RZR near the center/rear. There is a hole right below the drain plug so you do not need to remove the skid plate. The drain plug is removed with a 6mm allen. When you reinstall the drain plug, it should be torqued to 16 ft./lbs. Do not overtighten or you will strip the threads!



You can get a Pure Polaris Oil Change Kit at your Polaris dealer. It contains 2 quarts of oil, plus the filter. Part # 2202166.


Fill oil through the dipstick tube. You will need a small funnel. Tube is almost horizontal at the top, so pour slowly.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    UTV Guide Forum Index -> Polaris RZR All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group