Sport UTVs // Trip Reports // UTV News // Project Vehicles // UTV of the Month // Facebook  
 


FOX
TMW Offroad
Holz Racing Products


Axia Alloys
Factory UTV

Advertisement

Bobcat Toolcat 5600D 4 x 4 Utility Vehicle

Bobcat Toolcat 5600D 4 x 4

Bobcat Toolcat General Information:

The D-Series 5600 is the first compact loader to feature true four-wheel independent suspension, further establishing it as a “one-of-a-kind” machine. This provides top-of-the-line comfort while maximizing traction, attachment performance and turning. Four-wheel independent suspension is particularly beneficial when mowing, spraying, pushing snow or simply traveling comfortably over uneven terrain. The wheel and frame isolation of independent suspension increases wheel-to-ground contact, which better absorbs shock to help maintain a consistent mowing height, improve traction and decrease travel time due to a smoother ride.

So how does the Toolcat 5600 ride smoothly, yet still have a 2,000-pound payload or a 1,500-pound rated operating capacity? The answer is specially designed suspension stops integrated into the suspension system to help maintain the desired lifting capacity.

The new D-Series 5600 also features a full-time four-wheel drive system designed with an emphasis on performance while offering operation for a variety of conditions. Exclusive limited slip differentials constantly monitor tractive effort, delivering torque to all four wheels while automatically managing distribution of that power to respond to the ground conditions. Whether you need to power through mud and snow, maintain traction to minimize turf damage or travel an uphill trail, the machine will automatically sense where traction can be obtained and transfer power there.“

To further increase the operator’s productivity, we’ve added a power management feature to the Toolcat 5600 that balances power distribution between the attachment and drive system,” Gilles said. For example, if operators are blowing snow and encounter a deeper drift, the attachment and machine will need more time to power through it. Power management automatically makes the necessary adjustment, matching drivetrain and attachment requirements to deliver maximum efficiency and productivity. “This feature is a huge benefit in conditions such as mowing heavy brush, tilling or working on an incline,” Gilles said.

In addition to power management, the Toolcat 5600 drive system also features work mode, which delivers more precise control of travel speed when finite movements are required. Other drive system features that help provide smooth operation include shift-on-the-fly two speed, cruise control and hydrostatic braking, which is more efficient and convenient than conventional braking systems.

Maneuverability is one of the biggest reasons operators choose the Toolcat 5600, according to Gilles. Its all-wheel steer capability delivers a tighter turning radius than most ATVs. That type of performance enables operators to mow around trees, travel trails or move material in tight spaces such as corrals or between buildings on a university campus. Essentially, it enables them to work in areas that they couldn’t with equipment of the same size and capabilities.

All Wheel Steer - Bobcat Toolcat

All-wheel steering also makes the 5600 ideal for turf and grass work. With each axle sharing the same steering angle, sharp turns on grass and improved surfaces yield little or no damage. Together with work mode and dynamic braking, all-wheel steering allows operators to accomplish the precise maneuvers they need for the most meticulous jobs.“

The Toolcat is packed with Bobcat innovation — making it very agile, providing more operator confidence when working in those tight quarters or sensitive ground conditions.” Gilles said.

The Toolcat 5600 is called a utility work machine because of its versatile attachment lineup. There are more than 38 attachments available, including mowers, snow blades and blowers, augers, angle brooms, buckets, tillers and pallet forks to name a few. Not only is the selection vast, but attachments can also be mounted in the front, giving the operator excellent visibility of the work area.

Bobcat Toolcat Bob-Tach Attachments

The standard Bob-Tach™ mounting system enables operators to switch between attachments in less than a minute and requires no additional assistance or tools. From homeowners with acreages to grounds maintenance managers or municipalities, customers will find the attachment for the job and a way to put the 5600 to work.

The Toolcat utility work machine, with its lift, tow and haul capabilities, not only transports two workers and all the tools they need for a job, but it can also complete the task at hand. The standard two-inch receiver hitch and 4,000-pound towing capacity can easily satisfy the majority of maintenance-related towing requirements. Its 1,500-pound ROC enables it to easily lift and dump more dirt, rock, mulch and other materials than compact tractors of the same size. There’s also room to haul tools like trimmers and blowers, or materials such as mulch or dirt, in the utility work machine’s hydraulic dump cargo box, which features a 2,000-pound payload capacity.

Operating the Toolcat 5600 is a comfortable experience. With an automotive-style cab, tilt-steering wheel and drive pedal operation similar to that of a pickup, putting the machine to work is more intuitive and less intimidating than other types of compact equipment. For optimal operator comfort, customers can choose an enclosed cab with heat and air conditioning, a CD player and keyless start.

Bobcat Toolcat Specifications:

Engine
Engine Cooling Liquid
Engine Fuel Diesel
Horsepower 56 HP
Turbocharged Engine Yes
Performance
Operating Weight 5490 lbs
Travel Speed - High 18 mph
Travel Speed - Low 9 mph
Travel Speed - Reverse 9 mph
Machine Rated Capacity 2200 lbs
Capacities
Fuel Tank 20 gal
Cargo Box Length 56 in
Cargo Box Width 51 in
Cargo Box Bed Load Capacity 2000 lbs
Cargo Box Height 10 in
Cargo Box Bed Load Height 37 in
Total Vehicle Rated Capacity 4200 lbs
Hydraulic System
Auxiliary Std Flow 18.9 GPM
Auxiliary Pressure 3000 psi
Auxiliary High Flow 27.9 GPM
Dimension
Length 181 in
Length without Attachment 144.5 in
Width 60 in
Width (with bucket) 62 in
Height 81 in
Height with Operator Cab 81 in
Bed Height From Ground 37 in
Cargo Box Maximum Load 2000 lbs
Cargo Box Volume 18 cubic ft
Ground Clearance 8 in
Turning Radius (AWS Mode) 103 in
Outside Turning Diameter 17.2 ft

More Photos:

Bobcat Toolcat 5600D  Bobcat Toolcat 5600D  Bobcat Toolcat 5600D  Bobcat Toolcat 5600D  Bobcat Toolcat 5600D

Bobcat Toolcat 5600D  Bobcat Toolcat 5600D

Toolcat 5610:

Toolcat 5610 has three-point hitch, PTO and front lift arm for increased utility work machine versatility

(WEST FARGO, N.D. — August 2008) Bobcat introduces the Toolcat™ 5610, a revolutionary new model in the company’s line of one-of-a-kind utility work machines, featuring a three-point hitch and hydraulic power take off (PTO) for rear implements and the ability to run more than 40 front-mounted Bobcat® attachments.

Toolcat utility work machines accomplish many of the same tasks as a compact tractor, attachment carrier, compact loader, utility vehicle and more. The Toolcat 5610 has an available Category 1 three-point hitch that allows buildings and grounds crews, landscapers, agriculture producers, property owners and others to perform a variety of tasks with three-point implements. Customers with existing Category 1 three-point implements, up to 1,775 pounds, will be able to use them on the Toolcat 5610.

The Toolcat 5610 has an available PTO for running implements on the rear of the machine. A hydraulically driven motor powers the 540-revolutions-per-minute PTO to drive implements such as grain augers, multiple stage mowers, tillers, sprayers and snowblowers, among others. High-flow auxiliary hydraulics are required to run the PTO.

In addition to using three-point implements on the rear of the machine, the Toolcat 5610 is also a compact loader and attachment carrier, with a front lift arm that has a rated operating capacity (ROC) of 1,300 pounds. It has a 1,500-pound ROC if the optional counterweight kit is used.

The Bob-Tach™ mounting system on the lift arm enables operators to switch between attachments in less than a minute and requires no additional assistance or tools. The Power Bob-Tach system is available as an option to change non-hydraulic attachments with the flip of a switch from inside the cab. More than 40 front-mounted attachments are available for use on the Toolcat 5610.

With the rear PTO three-point hitch and the front lift arm, operators can use two different attachments on the Toolcat 5610 at the same time as long as one of the attachments is non-hydraulic. For example, a hydraulic soil conditioner can be mounted on the front while a non-hydraulic seeder implement is used on the rear of the machine. Using two attachments on the Toolcat 5610 will save the operator time by reducing the need to stop and change attachments between tasks.

Rear remote hydraulics are also an option on the Toolcat 5610. This option allows the operator to control two different hydraulic cylinders by pushing a switch in the machine’s cab for momentary flow of five gallons per minute. Many implements have two hydraulic cylinders that position or operate the equipment. This option allows the operator to use all features of these implements, such as to angle or cut a swale with a box blade, adjust the chute on a snowblower, or raise and lower the decks on a multi-stage mower.

The Toolcat 5610 does not have a rear cargo box like the Toolcat 5600. Instead, the Toolcat 5610 has two rear compartments capable of carrying up to 50 pounds of load each. These areas are
also convenient for carrying tools and other small items so they do not have to be transported in the cab.

The Toolcat 5610 features four-wheel independent suspension, providing top-of-the-line comfort while maximizing traction, attachment performance and turning. Four-wheel independent suspension is beneficial when mowing, spraying, pushing snow or traveling comfortably over uneven terrain. The wheel and frame isolation of independent suspension increases wheel-to-ground contact, which better absorbs shock to help maintain a consistent mowing height and improve traction.

The full-time four-wheel drive system on the 5610 is designed with an emphasis on performance while offering operation for a variety of conditions. Exclusive limited slip differentials constantly monitor tractive effort, delivering torque to all four wheels while automatically managing distribution of that power to respond to the ground conditions. From powering through mud and snow, maintaining traction to minimize turf damage or traveling an uphill trail, the Toolcat 5610 will automatically sense where traction can be obtained and transfer power there.

A power management feature on the Toolcat 5610 balances power distribution between the attachment and drive system. For example, if the operator is blowing snow and encounters a deeper drift, the attachment and machine will need more time to power through it. Power management automatically makes that necessary adjustment, matching drivetrain and attachment requirements to deliver maximum efficiency and productivity. This feature is also a benefit when mowing heavy brush, tilling or working on an incline.

In addition to power management, the Toolcat 5610 drive system also features a work mode, which delivers precise control of travel speed when finite movements are required. Other drive system features that help provide smooth operation include shift-on-the-fly two-speed, cruise control and both hydrostatic and conventional braking systems.

The all-wheel-steer capability of the Toolcat 5610 delivers a tighter turning radius than most all-terrain vehicles, allowing work to be done in areas that other equipment of the same size and capabilities can’t get to. It has a turning radius of 17.5 feet, which is smaller than a pickup truck, compact tractor or utility vehicle. All-wheel steer enables operators to mow around trees, travel trails or move material in tight spaces, such as corrals or between buildings on a university campus.

All-wheel steering also makes the Toolcat 5610 ideal for turf and grass work. The axles on the inside of the turn are at a sharper angle than those on the outside. When the 5610 makes sharp turns on grass or other improved surfaces, the all-wheel steering yields little or no damage to the turf. All-wheel steering also lessens the wear to the tires of the 5610 when the machine is working on concrete or asphalt. Turf tires are available for the Toolcat 5610 to further reduce turf damage.

The Toolcat 5610 has a side-mounted engine, providing easy access to routine maintenance items. In addition, the onboard diagnostics and machine shutdown protection feature lessens the chance of damage to the engine or hydraulic components.

The standard 2-inch receiver hitch and 4,000-pound towing capacity satisfies the majority of maintenance-related towing requirements.

With an automotive-style cab, tilt-steering wheel and drive pedal operation similar to that of a pickup, putting the machine to work is more intuitive and less intimidating than other types of compact equipment. For optimal operator comfort, customers can choose an enclosed cab with heat and air conditioning, a CD player and keyless start.

Manufacturer Info:

Bobcat Company

Website: www.bobcat.com

Fifty years ago, Bobcat Company unleashed a way to work better, smarter, faster. During 2008, the company is celebrating the 50th anniversary of Bobcat compact equipment, which began with the Melroe Self-Propelled Loader — a three-wheeled front-end loader — in 1958. That machine evolved into the Bobcat skid-steer loader and spawned the worldwide compact equipment industry. Today, Bobcat continues to lead the world in the design, manufacture and distribution of compact equipment.

Bobcat Company, headquartered in West Fargo, N.D., is part of Doosan Infracore International (DII), a U.S.-based subsidiary of Doosan Infracore, a global manufacturer of construction equipment.

Advertisement


Sport UTVs:
 · Commander 1000
 · Maverick 1000R
 · Maverick MAX 1000
 · Viking
 · RSX850i
 · RZR S
 · RZR XP 1000
 · RZR XP 900
 · RZR XP 4
 · Teryx 800

 · Teryx4
 · Wildcat 1000

Favorite Sites:
 · Dune Guide
 ·
Pirate UTV
 · SxS News

 · CrowleyOffroad
 · UTV Underground



Find UTV Guide on Facebook

Advertisement


UTV News | UTV Manufacturers | Compare UTVs | UTV of the Month
Product Reviews  UTV Shock Guide  Military  Advertise | Contact Us
Blog | Facebook | Instagram  Google+


Increase your website traffic with Attracta.com Copyright © 2010 Crowley Offroad LLC. All rights reserved.

OpenCube AJAX Components

unique visitor counter